Squid configuration directive wccp2_service_info

Available in: 4   3.5   3.4   3.3   3.2   2.7   3.1   3.0   2.6  

For older versions than 3.3 see the linked pages above

Configuration Details:

Option Name:wccp2_service_info
Replaces:
Requires:--enable-wccpv2
Default Value:none
Suggested Config:

	Dynamic WCCPv2 services require further information to define the
	traffic you wish to have diverted.

	The format is:

	wccp2_service_info <id> protocol=<protocol> flags=<flag>,<flag>..
	    priority=<priority> ports=<port>,<port>..

	The relevant WCCPv2 flags:
	+ src_ip_hash, dst_ip_hash
	+ source_port_hash, dst_port_hash
	+ src_ip_alt_hash, dst_ip_alt_hash
	+ src_port_alt_hash, dst_port_alt_hash
	+ ports_source

	The port list can be one to eight entries.

	Example:

	wccp2_service_info 80 protocol=tcp flags=src_ip_hash,ports_source
	    priority=240 ports=80

	Note: the service id must have been defined by a previous
	'wccp2_service dynamic <id>' entry.

 

Back

 

Introduction

Documentation

Support

Miscellaneous

Web Site Translations

Mirrors