File Reference
#include "squid.h"
#include "ClientInfo.h"
#include "comm/AcceptLimiter.h"
#include "comm/comm_internal.h"
#include "comm/Connection.h"
#include "comm/IoCallback.h"
#include "comm/Loops.h"
#include "comm/Read.h"
#include "comm/TcpAcceptor.h"
#include "comm/Write.h"
#include "CommRead.h"
#include "compat/cmsg.h"
#include "DescriptorSet.h"
#include "event.h"
#include "fd.h"
#include "fde.h"
#include "globals.h"
#include "icmp/net_db.h"
#include "ip/Intercept.h"
#include "ip/QosConfig.h"
#include "ip/tools.h"
#include "pconn.h"
#include "profiler/Profiler.h"
#include "sbuf/SBuf.h"
#include "SquidConfig.h"
#include "StatCounters.h"
#include "StoreIOBuffer.h"
#include "tools.h"
#include "ssl/support.h"
#include <cerrno>
#include <cmath>
Include dependency graph for

Go to the source code of this file.


static void comm_init_opened (const Comm::ConnectionPointer &conn, const char *note, struct addrinfo *AI)
 update FD tables after a local or remote (IPC) comm_openex(); More...
static int comm_apply_flags (int new_socket, Ip::Address &addr, int flags, struct addrinfo *AI)
static void commHandleWriteHelper (void *data)
static void commPlanHalfClosedCheck ()
static Comm::Flag commBind (int s, struct addrinfo &)
static void commSetReuseAddr (int)
static void commSetNoLinger (int)
static void commSetTcpRcvbuf (int, int)
bool isOpen (const int fd)
static void comm_empty_os_read_buffers (int fd)
int comm_udp_recvfrom (int fd, void *buf, size_t len, int flags, Ip::Address &from)
int comm_udp_recv (int fd, void *buf, size_t len, int flags)
ssize_t comm_udp_send (int s, const void *buf, size_t len, int flags)
bool comm_has_incomplete_write (int fd)
unsigned short comm_local_port (int fd)
int comm_open (int sock_type, int proto, Ip::Address &addr, int flags, const char *note)
void comm_open_listener (int sock_type, int proto, Comm::ConnectionPointer &conn, const char *note)
int comm_open_listener (int sock_type, int proto, Ip::Address &addr, int flags, const char *note)
static bool limitError (int const anErrno)
void comm_set_v6only (int fd, int tos)
void comm_set_transparent (int fd)
int comm_openex (int sock_type, int proto, Ip::Address &addr, int flags, const char *note)
void comm_import_opened (const Comm::ConnectionPointer &conn, const char *note, struct addrinfo *AI)
 update Comm state after getting a comm_open() FD from another process More...
void commUnsetFdTimeout (int fd)
 clear a timeout handler by FD number More...
int commSetConnTimeout (const Comm::ConnectionPointer &conn, int timeout, AsyncCall::Pointer &callback)
int commUnsetConnTimeout (const Comm::ConnectionPointer &conn)
int comm_connect_addr (int sock, const Ip::Address &address)
void commCallCloseHandlers (int fd)
void comm_reset_close (const Comm::ConnectionPointer &conn)
void old_comm_reset_close (int fd)
void commStartTlsClose (const FdeCbParams &params)
void comm_close_complete (const FdeCbParams &params)
void _comm_close (int fd, char const *file, int line)
int comm_udp_sendto (int fd, const Ip::Address &to_addr, const void *buf, int len)
AsyncCall::Pointer comm_add_close_handler (int fd, CLCB *handler, void *data)
void comm_add_close_handler (int fd, AsyncCall::Pointer &call)
void comm_remove_close_handler (int fd, CLCB *handler, void *data)
void comm_remove_close_handler (int fd, AsyncCall::Pointer &call)
int commSetNonBlocking (int fd)
int commUnsetNonBlocking (int fd)
void commSetCloseOnExec (int fd)
void commSetTcpKeepalive (int fd, int idle, int interval, int timeout)
void comm_init (void)
void comm_exit (void)
int ignoreErrno (int ierrno)
void commCloseAllSockets (void)
static bool AlreadyTimedOut (fde *F)
static bool writeTimedOut (int fd)
void checkTimeouts (void)
void commStartHalfClosedMonitor (int fd)
 Start waiting for a possibly half-closed connection to close. More...
static void commHalfClosedCheck (void *)
bool commHasHalfClosedMonitor (int fd)
 checks whether we are waiting for possibly half-closed connection to close More...
void commStopHalfClosedMonitor (int const fd)
 stop waiting for possibly half-closed connection to close More...
static void commHalfClosedReader (const Comm::ConnectionPointer &conn, char *, size_t size, Comm::Flag flag, int, void *)
 I/O handler for the possibly half-closed connection monitoring code. More...
int comm_open_uds (int sock_type, int proto, struct sockaddr_un *addr, int flags)
 Create a unix-domain socket (UDS) that only supports FD_MSGHDR I/O. More...


static IOCB commHalfClosedReader
static DescriptorSetTheHalfClosed = NULL
static bool WillCheckHalfClosed = false
 the set of half-closed FDs More...
static EVH commHalfClosedCheck
 true if check is scheduled More...

Function Documentation

static bool AlreadyTimedOut ( fde F)

Definition at line 1537 of file

References fde::flags, fde::_fde_flags::open, squid_curtime, and fde::timeout.

Referenced by checkTimeouts().

void comm_add_close_handler ( int  fd,
AsyncCall::Pointer call 

Definition at line 973 of file

References debugs, and fd_table.

static void comm_empty_os_read_buffers ( int  fd)

Empty the read buffers

This is a magical routine that empties the read buffers. Under some platforms (Linux) if a buffer has data in it before you call close(), the socket will hang and take quite a while to timeout.

Definition at line 100 of file

References buf, FD_MSGHDR, FD_READ_METHOD, and fd_table.

Referenced by _comm_close().

void comm_exit ( void  )

Definition at line 1234 of file

References Comm::CallbackTableDestruct(), fd_table, NULL, safe_free, and TheHalfClosed.

Referenced by SquidShutdown().

bool comm_has_incomplete_write ( int  fd)

Definition at line 147 of file

References assert, COMMIO_FD_WRITECB, isOpen(), and NULL.

Referenced by PconnPool::push().

void comm_init_opened ( const Comm::ConnectionPointer conn,
const char *  note,
struct addrinfo AI 
unsigned short comm_local_port ( int  fd)
int comm_open ( int  sock_type,
int  proto,
Ip::Address addr,
int  flags,
const char *  note 

Create a socket. Default is blocking, stream (TCP) socket. IO_TYPE is OR of flags specified in comm.h. Defaults TOS

Definition at line 222 of file

References comm_openex().

Referenced by accessLogInit(), comm_open_uds(), comm_openex(), ipc_thread_1(), ipcCreate(), and logfile_mod_udp_open().

int comm_open_listener ( int  sock_type,
int  proto,
Ip::Address addr,
int  flags,
const char *  note 

Open a port specially bound for listening or sending through a specific port. This is a wrapper providing IPv4/IPv6 failover around comm_openex(). Please use for all listening sockets and bind() outbound sockets.

It will open a socket bound for:

  • IPv4 if IPv6 is disabled or address is IPv4-native.
  • IPv6 if address is IPv6-native
  • IPv6 dual-stack mode if able to open [::]

When an open performs failover it update the given address to feedback the new IPv4-only status of the socket. Further displays of the IP (in debugs or cachemgr) will occur in Native IPv4 format. A reconfigure is needed to reset the stored IP in most cases and attempt a port re-open.

Definition at line 245 of file

References COMM_DOBIND, and comm_openex().

void comm_remove_close_handler ( int  fd,
AsyncCall::Pointer call 

Definition at line 1017 of file

References assert, debugs, fd_table, isOpen(), NULL, and p.

void comm_reset_close ( const Comm::ConnectionPointer conn)

enable linger with time of 0 so that when the socket is closed, TCP generates a RESET

Definition at line 792 of file

References Comm::Connection::close(), DBG_CRITICAL, debugs, Comm::Connection::fd, and xstrerr().

Referenced by ConnStateData::abortChunkedRequestBody(), clientProcessRequestFinished(), Adaptation::Icap::ServiceRep::putConnection(), and ConnStateData::setAuth().

void comm_set_transparent ( int  fd)

Set the socket option required for TPROXY spoofing for:

  • Linux TPROXY v4 support,
  • OpenBSD divert-to support,
  • FreeBSD IPFW TPROXY v4 support.

Definition at line 288 of file

References DBG_CRITICAL, DBG_IMPORTANT, debugs, enter_suid(), fd_table, leave_suid(), MYNAME, and xstrerr().

Referenced by comm_apply_flags().

void comm_set_v6only ( int  fd,
int  tos 

Definition at line 269 of file

References DBG_CRITICAL, DBG_IMPORTANT, debugs, MYNAME, and xstrerr().

Referenced by comm_openex().

int comm_udp_recv ( int  fd,
void *  buf,
size_t  len,
int  flags 

Definition at line 134 of file

References comm_udp_recvfrom().

Referenced by ipcCreate(), and IcmpSquid::Recv().

int comm_udp_recvfrom ( int  fd,
void *  buf,
size_t  len,
int  flags,
Ip::Address from 
ssize_t comm_udp_send ( int  s,
const void *  buf,
size_t  len,
int  flags 

Definition at line 141 of file

Referenced by ipcCreate(), IcmpSquid::SendEcho(), wccpAssignBuckets(), and wccpHereIam().

static Comm::Flag commBind ( int  s,
struct addrinfo inaddr 
void commCallCloseHandlers ( int  fd)

Definition at line 719 of file

References fde::closeHandler, debugs, F(), fd_table, NULL, and ScheduleCallHere.

Referenced by _comm_close(), and examine_select().

static void commHalfClosedCheck ( void *  )

iterates over all descriptors that may need half-closed tests and calls comm_read for those that do; re-schedules the check if needed

Definition at line 1630 of file

References DescriptorSet::begin(), commCbCall(), commHalfClosedReader, commPlanHalfClosedCheck(), debugs, DescriptorSet::end(), Comm::Connection::fd, fd_table, HERE(), i, NULL, Comm::Read(), and WillCheckHalfClosed.

static void commHalfClosedReader ( const Comm::ConnectionPointer conn,
char *  ,
size_t  size,
Comm::Flag  flag,
int  ,
void *   
bool commHasHalfClosedMonitor ( int  fd)
static void commPlanHalfClosedCheck ( )
void commSetCloseOnExec ( int  fd)
int commSetConnTimeout ( const Comm::ConnectionPointer conn,
int  seconds,
AsyncCall::Pointer callback 
static void commSetNoLinger ( int  fd)

Definition at line 1032 of file

References DBG_CRITICAL, debugs, fd_table, MYNAME, and xstrerr().

Referenced by comm_apply_flags().

static void commSetReuseAddr ( int  fd)

Definition at line 1047 of file

References DBG_IMPORTANT, debugs, MYNAME, and xstrerr().

Referenced by comm_apply_flags(), and comm_open_uds().

void commSetTcpKeepalive ( int  fd,
int  idle,
int  interval,
int  timeout 

Definition at line 1176 of file

References DBG_IMPORTANT, debugs, MYNAME, and xstrerr().

Referenced by Ftp::Server::AcceptCtrlConnection(), httpAccept(), and httpsAccept().

static void commSetTcpRcvbuf ( int  fd,
int  size 

Definition at line 1057 of file

References DBG_IMPORTANT, debugs, MYNAME, and xstrerr().

Referenced by comm_apply_flags(), and comm_open_uds().

void commStartHalfClosedMonitor ( int  fd)

The read channel has closed and the caller does not expect more data but needs to detect connection aborts. The current detection method uses 0-length reads: We read until the error occurs or the writer closes the connection. If there is a read error, we close the connection.

Definition at line 1608 of file

References DescriptorSet::add(), assert, commHasHalfClosedMonitor(), commPlanHalfClosedCheck(), debugs, HERE(), and isOpen().

Referenced by commMarkHalfClosed().

void commStartTlsClose ( const FdeCbParams params)

Definition at line 821 of file

References CommCommonCbParams::fd, fd_table, and Security::SessionSendGoodbye().

Referenced by _comm_close().

void commStopHalfClosedMonitor ( int const  fd)

Definition at line 1662 of file

References debugs, DescriptorSet::del(), fd_table, HERE(), NULL, and Comm::ReadCancel().

Referenced by _comm_close(), and comm_read_base().

int commUnsetNonBlocking ( int  fd)
static bool limitError ( int const  anErrno)

Definition at line 263 of file

Referenced by comm_open_uds(), and comm_openex().

void old_comm_reset_close ( int  fd)

Definition at line 807 of file

References comm_close, DBG_CRITICAL, debugs, and xstrerr().

Referenced by commCloseAllSockets().

static bool writeTimedOut ( int  fd)

Definition at line 1552 of file

References COMMIO_FD_WRITECB, Config, fd_table, squid_curtime, SquidConfig::Timeout, and SquidConfig::write.

Referenced by checkTimeouts().

Variable Documentation

EVH commHalfClosedCheck

Definition at line 74 of file

Referenced by commPlanHalfClosedCheck().

IOCB commHalfClosedReader

Definition at line 60 of file

Referenced by commHalfClosedCheck().

DescriptorSet* TheHalfClosed = NULL

Definition at line 72 of file

Referenced by comm_exit().

bool WillCheckHalfClosed = false

Definition at line 73 of file

Referenced by commHalfClosedCheck(), and commPlanHalfClosedCheck().






Web Site Translations